TruVision NVR 10 User Manual 71
Chapter 10
Live view
Description of live view
Live view mode is the normal operating mode of the unit where you watch live images
from the cameras. The NVR automatically enters into live view mode once powered up.
On the viewer, you can see the current date and time, camera name, and whether a
recording is in progress.
Status information
Information on the system and camera status is displayed as icons on the monitor. The
camera status icons are shown for each camera. Each icon represents information on a
specific item. These icons include:
Table 7: Description of the on-screen status icons
Indicates a sensor alarm.
Indicates recording (such as recording, motion detection, or alarm-triggered
recording).
Indicates alarms and system notifications. Clicking the icon opens a window that
lists the alarms and notifications.
More than one icon can be displayed at the same time.
The system status is displayed on the front panel by the status LEDs.
To Next Page
Loading...
Need help?
General
