Interlogix TruVision 10 - Video Output; Audio Output; Controlling Live View Mode

Chapter 10: Live view
72 TruVision NVR 10 User Manual
Video output
The NVR can be connected to up to two monitors, one VGA and one HDMI. However,
the same image is displayed when two monitors are connected.
Audio output
The HDMI monitor connector on the back panel outputs both video and audio signals.
There is an audio output on the back panel for speakers.
Controlling live view mode
Many features of the live view mode can be quickly accessed by placing the cursor on
a live image and clicking the right-button of the mouse. The mouse menu appears (see
Figure 14 on page 72).
The default settings of the menu commands are provided in Appendix D “Default menu
settings” on page 139.
Figure 14: The mouse menu for the main monitor
Table 8: Mouse menu
Item
Name Description
1
. Menu Enter the Main menu.
This option is not available from monitor B.
2
. Single Screen Switch to a full-
screen view for the selected camera from the dropdown
list.
3
. Multi-screen Switch between the different multiview options from the dropdown list.