Chapter 8: Archiving files
TruVision NVR 11 User Manual 57
If using a USB memory drive, insert the device into the USB port on the front panel.
If more than one media type is found, the USB device takes precedence over the
others.
2. Press the Archive button on the front panel to open the Quick Archive window.
3. Select the files you want to archive.
4. Click Start or press Archive on the front panel again. The unit starts to download
the selected files to the backup device.
Note: A message will appear if there is a capacity limitation on the backup device.
A message will appear to confirm when the download is complete.
Archive files from search results
You can insert a mini-USB hub to the USB port to attach a mouse for navigation or a
USB drive for archiving. However, the unit may not support all types of USB hubs.
The Archive options available may depend on the type of backup device selected.
Archive window
After searching for all the recordings from selected parameters and cameras using
Advanced Search, the results are listed in the Search window. When you select the
desired files to archive and click the Archive or Archive All buttons, the Archive
window appears (see Figure 20 on page 58).
The Archive window lists all the files currently on your backup device. The window
shows the free space available on the backup device. You can also delete files from the
device and search by type of files present. Files cannot be played back from the
Archive window.
To Next Page
Loading...
