Interlogix TruVision NVR 11 - Page 129

Chapter 14: Device management
TruVision NVR 11 User Manual 125
Option Description
2.
RTSP Authentication Type
The administrator can set the authentication for accessing RTSP
streams with this dropdown menu.
This should be left at its default value unless otherwise instructed by
the system administrator, as choosing the wrong value will negatively
impact performance.
This function is only available via the OSD.
3.
Enable ISAPI
ISAPI is an application programming interface used by the recorders
to communicate with certain software platforms.
It should be left at its default setting unless otherwise indicated by the
system administrator.
This function is only available via the OSD.
4.
Enable HTTP
Hypertext Transfer Protocol (HTTP) is the protocol utilized for various
communications to and from the recorder. Disabling this feature
effectively locks down all HTTP communications, making it
inaccessible remotely over the network.
It should be left a
t its default setting unless otherwise indicated by the
system administrator.
This function is only available via the OSD.
5.
HTTP Authentication Type
The administrator can set the method for authentication used by the
web interface.
This should be left at its default value unless otherwise instructed by
the system administrator, as choosing the wrong value will negatively
impact performance.
This function is only available via the OSD.