4BChapter 5: Camera management
6. Select the type of user from the drop-down list. The options are Viewer and
Operator.
7. Click OK to save the changes and return to the main “User management”
screen.
To delete a user:
1. Click the User management folder to open its screen.
2. Select the Delete button. The user management screen appears.
Note: Only the administrator can delete a user.
3. Click the desired user in the list. Select Delete.
Confirm that you want to delete the user.
4. Click OK to save the changes.
Modifying user information
You can easily change the information about a user such as their name,
password or computer ID.
To modify user information:
1. Click the User management folder to open its screen.
2. Select the user.
3. Click the Modify button The user management screen appears.
4. Change the information required.
Note: The user “Admin” can only be changed by entering the admin
password.
5. Click OK to save the changes.
Formatting the SDHC card
Use the HDD Configuration screen to display the capacity and free space
available on the SDHC card in the camera as well as the working status of the
HDD. You can also format the card.
Note: This function is not available for wedge dome cameras.
Before formatting the HDD (the SDHC card), stop all recording. Once formatting
is completed, reboot the camera as otherwise the device will not function
properly.
When the card becomes full, it overwrites the oldest recordings.
TruVision IP Do
me Open-Standards User Manual 43
To Next Page
Loading...
