10 TruVision IP PTZ Camera FW 5.1 Configuration Manual
Camera configuration
This chapter explains how to configure the cameras through a web browser.
Once the camera hardware has been installed, configure the camera’s settings through
the web browser. You must have administrator rights in order to configure the cameras
over the internet.
The camera web browser lets you configure the camera remotely using your PC. Web
browser options may vary depending on camera model. The camera is configured
using on-screen display (OSD) menus.
There are two main folders in the configuration panel:
Local configuration
Configuration
Configuration menu overview
Use the Configuration panel to configure the server, network, camera, alarms, users,
transactions, and other parameters such as upgrading the firmware. See Figure 2 and
Table 2 below for descriptions of the configuration folders available.
Figure 2: Configuration panel (Device Information tab of the System folder selected)
Table 2: Overview of the Configuration panel
Item Description
1.
Defines device basic information including SN and the current firmware
version, time settings, and maintenance parameters.
To Next Page
Loading...
