2 / 4 ZeroWire Quick User Guide
Displaying Status in a PD6662 system
In a PD6662 system the Status key behaviour has been
modified for greater security. It will be off or red, and not
announce system status when pressed.
To check system status and unlock the screen saver,
enter your PIN code followed by enter:
Enter your user PIN
code.
1.
STATUS
Select Status.
This action unlocks the
screen saver.
Arming in Away Mode
READY STATUS
Check ready key is
green.
Check status key is
green.
1.
AWAY
Select the Away Mode.
2.
3.
Leave the premises in
30 to 60 seconds (as
set by the installer).
4.
Close the Final Set
Door.
Arming in Stay Mode
1.
STATUS
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors
outside your “stay
mode”, have everyone
leave those areas.
2.
STAY
Select the Stay Mode.
3.
4.
Stay within the
protected areas.
Arming in Instant Stay Mode
1.
STATUS
Green Flashing Green
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your “stay mode”, have
everyone leave those
areas.
2.
STAY
STAY
Select the Stay Mode
twice.
Or, press Stay button
once when system is
already in Stay Mode. In
this case, you will not be
asked second time for a
PIN code.
3.
4.
Stay within the
protected areas.
5.
Final door becomes an
instant alarm zone.
Arming in Night Mode
1.
STATUS
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your “stay mode”, have
everyone leave those
areas.
2.
STAY
STAY
STAY
Select the Stay Mode
three times.
Or, press Stay button
once when system is
already in Instant Stay
Mode.
3.
4.
Stay within the
protected areas.
5.
Final door becomes an instant alarm zone.
Note: Subsequent presses of the Stay button loop through the
three Stay Mode states:
Stay Mode Stay Instant Mode Night Mode
STAY
STAY
STAY
Note: The 3
rd
Stay option will be available only if Engineer
configures Night mode.
USER PIN CODE
ENTER
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS