Intermatic EI500 Series - Advanced Timer Operations; Reviewing Programmed Events; Clearing an Event; Operating the Time Switch Modes


Clearing/DeletinganEvent
1. PressthePROG(Program)buttonasmanytimesasnecessarytolocatethesettingyouwanttoclear.
2. PressandholdtheMODEbutton.
3. PressthePROGbuttontoclearthesetting.
4. PresstheCLOCKbuttontoreturnthedisplaytothetimeofday.
OperatingtheTimeSwitch
1. PresstheMODEbuttonrepeatedlytosetthetimertoautomatic,randomormanualmode.Forthetimeswitch
torunprogrammedeventsit,itmustbesettoAUTOmode.
2. AUTO‐runsalleventsautomatically,according tothescheduleyouhaveset.ThewordAUTOappearsinthe
display.
3. RND(Random)–runsallevensinRANDOMmode.ThisisasecurityfeatureinwhichONandOFFtimes
randomlydiffer
±15minutesfromtheprogrammedtimes,creatingamore“lived‐in”look.Theword
RDMappearsinthedisplay.Remember,settingON/OFFeventswithin30minutesorlessfromoneanother
canmakethetimesoverlap.
4. MANUAL–turnsONandOFFonlywhentheuserpressestheON orOFFbutton.Thedisplayisblank,showing
neitherRDMorAUTO
OverridingTimerSettings
1. PressONand/orOFFbuttonstooverridecurrentprogrammed events.
2. IfthetimerisnotinMANUALmode,itwillobeythenextprogrammedevent.Thisallowstheusertomanually
turnalightonandallowthetimertoshutthelightbackoffatapresettime.
ResettingtheTimer
1. Incaseofoperationalfailureofthetimer,presstheRESETbuttontoclearallsettings.
2. Restartthetimer.
