To Next PageTo Next Page
Need help?Do you have a question about the Intermatic ET70415CR and is the answer not in the manual?
General| Brand | Intermatic |
|---|---|
| Category | Switch |
| Amperage | 15A |
| Horsepower | 1/2 HP |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Number of Channels | 1 |
| Shortest Time Setting | 1 minute |
| Longest Time Setting | 7 days |
| Battery Backup | Yes |
| Color | White |
| Programmable | Yes |
| Display | LCD |
| Voltage | 120V |
| Maximum Load | 15A |
Describes the red LED display for prompts and data entry.
Explains how to initialize the time switch by clearing memory and loads.
Details the function of the RUN/SET switch for data entry and saving.
Explains how the switch activates automatic switching and the override function.
Details manual load switching and its interaction with overrides.
Describes the feature that turns on multiple loads sequentially at 15-second intervals.
Outlines the steps to review data by placing the RUN/SET switch in SET mode.
Explains how to review internal clock, calendar, Astro, and Holiday information.
Details how to revise or delete information during Set Up Review.
Explains how to review specific day schedules, day groups, or copied schedules.
Details how to review specific holiday switching activities.
Explains how to review programmed override interval or pulse durations.
Provides instructions for revising program data, including RUN/SET switch usage.
Details procedures for revising or deleting holiday schedules and dates.
Details how to mount the enclosure using appropriate screws and cover removal.
Explains how to disconnect and remove the logic module for wiring.
Describes how to remove the metal cover to access the circuit board.
Explains how to switch the timer from 12-hour AM/PM to 24-hour format.
Details how to override automatic DST adjustments for specific regions.
Explains how to change the input voltage for multi-volt models.
Provides instructions for wiring the 24-volt model using bell or thermostat wire.
Guides on connecting loads to relay terminals and using COM terminals.
Shows wiring examples for the multi-volt model with different load voltages.
Illustrates wiring configurations for the 24-volt model with various load voltages.
Provides solutions for when the timer display is not illuminated.
Offers solutions for loads failing to switch according to the programmed schedule.
Helps diagnose and fix issues with loads switching at unintended times.
Solutions for when the timer's pushbuttons are unresponsive.
Addresses common mistakes and errors encountered during programming.
Explains why override functions might not initiate.
Solutions for when remote override functions do not stop correctly.
Notes that actual override duration may vary by ±30 seconds.
Explains why the display might not alternate for pulse/interval entries.
Explains conditions under which programmed times may not appear during review.
Addresses issues with programming pulses for latching contactors and their operation.
