EasyManua.ls Logo

Intermatic ET8415 - Resetting and Memory Clearing; Technical Specifications

Intermatic ET8415
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Time Switch
Input Voltage: 120 to 277 VAC, 50/60 Hz
Power Consumption: 7 watts maximum
Contact Conguration: SPST x 4. See wiring diagrams in this manual
Contact Ratings:
Specifications
Clearing Time Switch Memory
During a memory clear, the time switch performs the same actions as a reset, but also clears all user settings, except the custom Day-
light Savings Time settings. To perform a memory clear do the following:
1. Press and hold ENTER/NEXT.
2. While pressing and holding ENTER/NEXT, press and release the reset button. Do not release ENTER/NEXT.
3. Continue to press and hold ENTER/NEXT until MEM CLEAR and DONE appear, followed by the congured operational mode
setting.
In addition, the following occurs:
4. The time of day is reset to January 1 at 12:00 A.M.
The timer returns to Manual Mode
The operational settings can be adjusted
The Astronomical zone defaults to AL (Alabama) and CNT (center).
The Astronomical user offsets are set to zero.
All scheduled switching activity settings are erased.
All calender information is erased.
The display ashes as described in the reset procedure.
Resetting the Time Switch
To perform a reset, press the reset button. The following occurs:
All display segments activate for one second, then the timer model number appears, followed by the rmware revision.
The current operational mode setting appears for the rst two relays, followed by the current setting for the last two relays.
The time switch defaults to Manual Mode.
The time of day resets to 12:00 AM and the day of the week ashes.
+
-
ON/
OFF
ON/
OFF
MODE
DAY
Reset
button
ENTER
NEXT
UL CSA Load Type Voltage Frequency
30 Amp 30 Amp Resistive 120/240 VAC 60 Hz
20 Amp 20 Amp Resistive 28 VDC
30 Amp 30 Amp Inductive 120/240 VAC 60 Hz
20 Amp 20 Amp Ballast 120-277 VAC 60 Hz
5 Amp 5 Amp Tungsten 120/240 VAC 60 Hz
1 HP 1 HP Motor 120 VAC 60 Hz
2 HP 2 HP Motor 240 VAC 60 Hz
4.5 Amp Electronic Ballast 120-277 VAC 60 Hz
Events—Time switch can support up to 28 timed ON and 28 timed OFF events and 4 Astro ON and 4 Astro OFF events.
Clock Backup—100-hour Supercapacitor
Minimum ON or OFF time—1 minute
Maximum ON or OFF time—Indenite
Shipping Weight—2.5 lb. (1.1 kg)
Enclosures—Type 3R indoor/outdoor lockable metal enclosure
Knockouts—Combination 1/2-3/4 inch size, 1 on back and each side, 2 on bottom
Wire Size—AWG #14 through #8

Related product manuals