Intermec CK3 Instruction Manual

3
CK3 Multidock (AD21 and AD22)
Instructions
The CK3 Ethernet multidock (AD21) and charge-only multidock
(AD22) powers up to four CK3 Mobile Computers. The AD21
also supports Ethernet connectivity with a switch and uplink
port.
What You Need
You also need these items (sold and ordered separately):
• Intermec 12 VDC universal power supply Model AE21
• An appropriate AC power cord
• Ethernet cables (AD21 only)
Using the Multidock
The CK3 status LED is red when the CK3 is charging and green
when the CK3 is fully charged.
CK3 status LED
Back LED
(4 places)
Front LED
(4 places)

Intermec CK3 Specifications

General

RAM capacity	128 MB
Certification	GS, EN55022 Class B, ICES-003 Class B, EN 300.328, FCC Part 15.247, RSS-210, EMC, FCC Part 15, R&TTE, RoHS, WEEE, cULus
Product color	Gray
Internal memory	512 MB
Built-in display	Yes
Housing material	-
Display resolution	240 x 320 pixels
Display technology	TFT
Processor frequency	520 MHz
Bluetooth version	2.0+EDR
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Operating system installed	Windows Mobile 6
Type	Handheld bar code reader
Scanner type	1D/2D
Power source type	Battery
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	36 mm
Width	84 mm
Height	217 mm
Weight	453 g