Intermec CN4

Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 51
To use Intermec Settings
1 On the CN4, tap Start > Settings > the System tab > Intermec
Settings.
2 Tap a menu bar. A new menu or a list of configurable items
appears.
3 In a list of configurable items, choose or change options by
entering data in the entry fields or checking the appropriate check
box.
• To restore the default settings to all items in the current menu,
tap Menu > Restore Menu Defaults. Tap Yes to clear the
confirming message and restore menu defaults.
• To restore all default settings, tap Menu > Restore All
Defaults. Tap Yes to clear the confirming message and restore
all defaults, which may take a few minutes.
4 Tap Back or to save your changes and go back to the previous
screen.
Tap to return to the main menu.
5 To close Intermec Settings, in the main menu tap ok or choose
Menu > Exit.
For more information on all parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.