CV60 Recovery CD Instructions 1
Introduction
The CV60 Recovery Tools CD-ROM restores the partition on a
CV60 Vehicle Mount Computer. The CV60 Recovery Tools
CD can be shared from a server and executed on a client CV60
PC. More specifically, the CV60 Recovery Tools CD can:
•When used with Symantec Ghost, you can take a snapshot of a
CV60 main hard drive partition and convert the image to a
Ghost (GHO) file to restore on other systems. You must install
a full copy of the Symantec Ghost Solution Suite onto the server.
• Update the CV60 partition with any provided GHO file.
Using Network Connections to Restore an Image
Client (CV60 PC)
The client CV60 must have the following before doing the net-
work recovery partition:
• Phoenix BIOS version 1.21 or later
• 10BaseT connection to a Network
• an attached PS/2 keyboard
•a USB floppy drive
Server (Personal Computer)
The server must have a 10BaseT/100BaseT connection to a Net-
BEUI or TCP/IP network and can be running Windows 2000 or
XP before restoring Windows CE, XP Professional, or XP
Embedded on the CV60 Computer.
CD-ROM Drive Sharing
Share the contents of the CV60 Recovery CD among the client
CV60s. Note that drive D:\ is used for this example. Insert the
CV60 Recovery CD-ROM in the server CD-ROM drive, then
do the following to share the drive:
1 From the Windows desktop, double-click My Computer,
then right-click the CD-ROM drive for a pop-up menu.
2 Select Sharing to access the CD-ROM Properties window,
then click Shared As to enable the applicable fields. Type
Note: This folder must be shared between the CV60
Computer and the server. For example,
“C:\CV60base\Update.”
To Next Page
Loading...
