CV60 Recovery CD Instructions 3
4 Enter the required information aboutWorkgroup/Domain,
Server Name, Share Name, Computer Name and User Name
into the text boxes. This information is saved for network
login when you run the floppy disk setup for network restore.
Creating a Custom Image Restore Floppy
1 Select an Image Type for the operating system.
2 Check Custom to create a custom image.
3 Click Format to have Boot Disk Builder create the boot disk.
Note: When building a custom image recovery floppy,
you must specify a unique image name (other than the
default) in the text box.
To Next Page
Loading...
