Intermec Font Card - Verifying Font Card Contents

Chapter 3 — Using Fonts in a Font Card
8 Font Card Installation Instructions
Confirming the Content of a Font Card
To confirm the content of the card, select the Fingerprint application in
Intermec Shell (see the User’s Guide for the printer) and issue the follow
-
ing instruction:
FILES "card1:"
yields for example:
Files on card1:
97257000.PRG 38547 97257100.PCX 5332
97257420.1 16316 97257430.TXT 292
97257520.1 14888 97257530.TXT 220
97257620.1 34518 97257630.TXT 730
97257720.1 35347 97257730.TXT 685
97257401.UFF 3029960
e .UFF file is the only file that varies between different font cards. e
.UFF file will create two files on the device "rom:"; one .BIN file which
contains the actual font and one .NCD file that contains the charac
-
ter set for the font. To see the .BIN and .NCD files, use the following
instruction:
FILES "rom:"
yields for example:
Files on rom:
CHESS2X2.1 1172 CHESS4X4.1 140
DFST-M3.BIN 3014031 DIAMONDS.1 160
ERRHAND.PRG 3799 FILELIST.PRG 119
GB2312.NCD 15756 GLOBE.1 776
LBLSHTXT.PRG 417 LINE_AXP.PRG 4635
LSHOPXP1.SUB 388 MKAUTO.PRG 124
PUP.BAT 275 SHELLXP.PRG 9710
WINXP.PRG 15209 default.html 338
home.htmf 83 htmlhead.htmf 377
images/ 0 monitor 9114
nav.html 999 passwd 85
restrictions 96 secure/ 0
support.htmf 782
0 bytes free 3078585 bytes used