IF61
Fixed Reader Mounting Bracket Instructions
To install the mounting bracket, you need to supply your own mounting
screws (6 mm (0.25 in) maximum width).
To install the mounting bracket
Orient the mounting bracket as shown in the next illustration and use it
as a template to drill four holes in the installation surface.
1
Note: The IF61 is certified to an IP54 environmental rating
when mounted as described.
Attach the bracket to the surface with four mounting screws.
Install four shoulder bolts on the underside of the IF61 as shown in the
next illustration. Do not overtighten the bolts.
2
3
To Next Page
