Need help?Do you have a question about the Intermec SG20T and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D |
| Optical sensor resolution | - pixels |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), Plessey, Telepen, U.P.C. |
| 2D (matrix & stacked) barcodes supported | Not supported |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Product color | Gray |
| Built-in display | No |
| International Protection (IP) code | IP30 |
| Input voltage | 5 V |
| Power consumption | 120 mA |
| Power source type | DC |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 61 mm |
| Height | 65 mm |
| Weight | 125 g |
Explains how to identify and understand warnings, cautions, and notes in the document.
Provides instructions and tips for scanning various types of bar codes with the SG20T.
Covers scanner reset, postamble, hands-free, and decoding optimization via bar codes.
Details DPM mode, online, and offline scanner configuration using EasySet.
Offers guidance on diagnosing and resolving issues encountered with the SG20T scanner.
Lists common problems and their corresponding solutions for the SG20T.
Covers essential maintenance tasks to keep the SG20T scanner in good working order.
Detailed steps for upgrading the SG20T scanner firmware.
To Next Page
