Need help?Do you have a question about the Intermec ScanPlus 1800 and is the answer not in the manual?
General| Type | Handheld Barcode Reader |
|---|---|
| Connectivity | Wired |
| Scanning Technology | Laser |
| Scanning Capability | 1D |
| Scan Rate | 100 scans per second |
| Scan Pattern | Single Line |
| Resolution | 0.1 mm |
| Supported Barcodes | Code 39, Code 128, Interleaved 2 of 5 |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 °C to 60 °C |
| Light Source | Laser Diode |
Guides on connecting the scanner via PC keyboard wedge, USB, or RS-232.
Instructions for selecting barcode symbologies the scanner can read.
Procedure to reset the scanner to its factory default settings.
Instructions to activate the scanner's trigger mechanism.
Guidance on using the EasySet software for advanced scanner configuration.
Instructions on the basic operation and usage of the scanner.
Information on typical average reading distances for the scanner.
Guidance on using test barcodes to verify scanner setup.
Options for selecting the keyboard layout for PC connection.
Optional settings for customizing scanner parameters like postamble.
Optional settings for RS-232 connection: baud rate, data bits, parity.
Procedure to disable all barcode symbologies on the scanner.
Instructions for enabling specific barcode symbologies like Code 39.
Using provided barcodes to test the scanner's configuration.
Instructions to reset the scanner to its factory default settings.
Enabling the scanner's trigger mechanism and handling non-trigger models.
Activating or deactivating automatic hands-free scanning with a stand.
Steps to launch and use the EasySet software for scanner configuration.
To Next Page
