Need help?Do you have a question about the Intermec SG20B and is the answer not in the manual?
General| Type | Handheld Barcode Scanner |
|---|---|
| Scanning Technology | Laser |
| Scan Rate | 100 scans per second |
| Power Supply | 5 V DC |
| Connectivity | Bluetooth |
| Supported Barcode Types | 1D, 2D |
| Operating Temperature | 0°C to 50°C |
| Battery | Lithium-ion |
| Durability | 1.5 m drop specification |
| Resolution | 0.1 mm |
| Humidity | 5% to 95% (non-condensing) |
| Current Consumption | 100 mA |
| Wireless Range | Up to 100 m |
General description of the SG20B Cordless Scanner, its features, and available models.
Instructions on charging the SG20B scanner using its rechargeable battery.
Information on scanning bar codes and supported symbologies for the SG20B.
Steps to connect the SG20 Bluetooth Base Station to a host device via various interfaces.
Procedure for pairing and connecting the SG20B scanner to its Bluetooth Base Station.
Using configuration bar codes for initial setup of the scanner and base station.
Using the EasySet application for advanced system configuration options.
Steps to connect the SG20B scanner directly to a host via Bluetooth HID or SPP profiles.
Basic setup and configuration for the SG20B scanner in direct connection mode.
Using EasySet for scanner configuration when connected directly to a host.
Provides solutions for common problems encountered with the scanner and base station.
Procedure to upgrade the SG20B scanner firmware using the base station.
Steps to upgrade the firmware for the SG20 Bluetooth Base Station.
Procedure to upgrade scanner firmware when connected directly to a host.
Detailed steps for safely replacing the SG20B scanner battery.
Using configuration bar codes to enhance scanner reading performance.
To Next Page
