Intermec SG20B

Appendix B — Optimizing Scanner Performance
SG20B Cordless Scanner + Bluetooth Base Station User’s Guide 99
Select the pre-defined imager setting that best suits your needs:
1D bar codes only
Standard 1D and 2D bar codes (*)
Standard 1D and 2D bar codes, bright environment
Standard 1D and 2D bar codes, reflective surface
Hands-Free Scanning
For hands-free scanning as explained in “Hands-Free Scanning” on
page 9 activate Autostand triggering mode by scanning this
configuration bar code:
Autostand Triggering Mode