Chapter 1 — About the SG20B Cordless Scanner
SG20B Cordless Scanner + Bluetooth Base Station User’s Guide 3
SG20B Scan Engine Option: The scan engine option of your SG20B can be
found in the first part of the configuration number. In this illustration, the scan
engine option is SG20B1D for 1D linear imager.
Charge the SG20B
The SG20B uses a rechargeable lithium-ion battery (P/N BP-SG20-
xxx) as its main power source.
The SG20B battery can be charged using the SG20B Charge Base (P/N
CB-SG20-xxx) or SG20 base station (P/N BB-SG20-xxx). For more
information, see
“Required Accessories” on page 13.
Intermec Technologies Corp.
Everett, WA 98203
BDA: XXXXXXXXXXXXXXX
CN: SG20T1D-XXXXXX
12584563214587
Contains TX FCC ID: HN2-BTM311
MEX SCT RCPACBT05-068
IC: ICES-003 CLASS B
IC: 1223A-BTM311
ANATEL: 1192-06-0569
ݭɼ૦ծ
MODEL, , : SG20
5V 1.7A
Made in Singapore
MFD , : YY/MM/DD
Intermec Technologies Corp.
Everett, WA 98203
BDA: XXXXXXXXXXXXXXX
12584563214587
IC: ICES-003 CLASS B
MFD , : YY/MM/DD
MODEL, , : SG20B
5V 1.7A
Made in Singapore
ݭɼ૦ծ
SG20B1D-XXXXXX
CN: SG20B1D-XXXXXX
The battery pack used with this product may ignite, create a
chemical burn hazard, explode, or release toxic materials if
mistreated. Do not incinerate, disassemble, or heat above 100°C
(212°F). Do not short circuit; may cause burns. Keep away from
children.
Charge only in Intermec Models CB-SG20-xxx or BB-SG20-xxx.
Use of incorrect charger may present a risk of fire or explosion.
Promptly dispose of used battery pack according to the
instructions.
To Next Page
Loading...
Need help?
General
