Intermec SG20B - Configure Your Scanner with Easyset in Direct Connection; Online Setup with Easyset

Chapter 5 — Connect and Configure the SG20B Scanner in Direct Connection
60 SG20B Cordless Scanner + Bluetooth Base Station User’s Guide
Configure the Postamble
The default postamble is <CR> <LF>. For certain applications or
when using your scanner as an HID Bluetooth device you may need to
change this setting. Use the following configuration bar codes to
change the default postamble in your scanner.
Carriage Return + Line Feed (*)
None
Carriage Return
Enter
Configure Your Scanner with EasySet in Direct Connection
EasySet is an Intermec configuration application that provides you
with two ways to configure your scanner.
• Online setup—send configuration commands from EasySet
directly to the product.
• Offline setup—send configuration commands to a bar code setup
sheet, print the setup sheet and use a connected scanner to scan
the bar codes.
EasySet is available on the Intermec web site at www.intermec.com/
EasySet. Simply download and install.
Online Setup with EasySet
Online setup with EasySet is available in direct connection if you are
using your scanner either as an SPP or as an HID Bluetooth device.