Need help?Do you have a question about the Intermec SR30 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Scanner type | - |
| Optical sensor resolution | - pixels |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | Code 128, Code 39, Code 93, EAN 2, EAN 5, EAN-13, EAN-8, MSI, Plessey, Telepen, U.P.C. |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Codablock, Data Matrix |
| Input voltage | 5 V |
| Power source type | USB |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Product color | Blue, Grey |
| International Protection (IP) code | IP30 |
Weight and Dimensions| Width | 72.5 mm |
|---|---|
| Weight | 190 g |
Information on warnings, cautions, and notes for safe operation and equipment protection.
Details on accessing Intermec's website for manuals and technical information.
Contact information for Intermec product support via phone in the US and Canada.
Information on finding service locations, including specific contacts in South Korea.
Identifies the target audience responsible for installing, configuring, and maintaining the SR30 scanner.
Information on how to download additional Intermec documents from their website.
States that the product is covered by patents and may have pending patents.
Overview of the SR30 as a general-duty scanner for POS applications, available with linear or area imagers.
Explains how the SR30 is powered via accessory cables connected to a host device or external supply.
Details the meaning of different status light blink patterns for successful/unsuccessful scans and errors.
Explains the audio feedback provided by the SR30 through various beep sequences for different functions.
Instructions and supported symbologies for scanning bar codes with the SR30, including a test bar code.
Step-by-step instructions for creating USB and RS-232 connections to host devices.
Bar codes for configuring the SR30 with different international keyboard layouts for USB or keyboard wedge connections.
Bar codes for configuring basic serial parameters (baud rate, data bits, parity, stop bits) for RS-232 connections.
Guidance on identifying and resolving common problems with the SR30, including contacting product support.
Procedures for upgrading the SR30's Host Interface Processor (HIP) and imager firmware using EasySet.
Instructions for cleaning the SR30 scanner window safely without voiding the warranty.
Detailed measurements for the SR30 scanner's length, height, width, and weight.
Reading distances and densities for the SR30's EV12 linear imager.
Reading distances and densities for the SR30's EA15 2D area imager.
Information on available desktop, hands-free, and wall mount stands for the SR30.
Details on various USB, RS-232, and keyboard wedge cables for connecting the SR30.
Tables showing default values for SR30 configuration commands, including interface and data transmission settings.
To Next Page
