Intermec SR30 Instructions

SR30
Desktop Stand Instructions
The SR30 desktop stand (P/N 203-846-xxx) provides you with a convenient
way to store the SR30 Handheld Scanner when you are not using it. The
desktop stand ships with everything you need to install the stand.
To install and use the desktop stand
1 (Optional) Attach the cup to a surface with the adhesive foam or two
drywall screws that ship with the stand.
2 Insert the SR30 into the desktop stand.
Or

Intermec SR30 Specifications

General

Type	Handheld bar code reader
Scanner type	-
Optical sensor resolution	- pixels
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, Code 93, EAN 2, EAN 5, EAN-13, EAN-8, MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Data Matrix
Input voltage	5 V
Power source type	USB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Product color	Blue, Grey
International Protection (IP) code	IP30

Weight and Dimensions

Width	72.5 mm
Weight	190 g