Need help?Do you have a question about the Intermec Sabre 1400 and is the answer not in the manual?
Guide to setting up the Sabre 1400 for terminal connections and symbologies.
Details on connecting the standard RS-232 C cable to the scanner and computer.
Barcode for configuring RS-232 C serial port settings like baud rate, data bits, parity, and postamble.
Barcodes for customizing RS-232 parameters: baud rate, data bits, parity, and postamble.
Details on connecting the wand emulation cable to the scanner and interface.
Barcodes for enabling digital and analog wand emulation modes.
Guide to setting up the Sabre 1400 for terminal connections and symbologies.
Details on connecting the standard RS-232 C cable to the scanner and computer.
Barcode for configuring RS-232 C serial port settings like baud rate, data bits, parity, and postamble.
Barcodes for customizing RS-232 parameters: baud rate, data bits, parity, and postamble.
Details on connecting the wand emulation cable to the scanner and interface.
Barcodes for enabling digital and analog wand emulation modes.
General| Interface | RS-232, Keyboard Wedge, USB |
|---|---|
| Resolution | 5 mil |
| Connectivity | Corded |
| Supported Barcodes | Code 39, Code 128, UPC/EAN, Interleaved 2 of 5, Code 93, Codabar, MSI Plessey |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 5% to 95% non-condensing |
To Next Page
