Intermec SR30 User Manual

Chapter 1 — Learning About the SR30
2 SR30 Handheld Scanner User’s Guide
Introducing the SR30 Handheld Scanner
The Intermec SR30 Handheld Scanner is a general duty scanner
designed to collect data at the point of service (POS) for
customer applications. The SR30 comes with either a linear or
area imager.
SR30 Handheld Scanner
Powering the SR30
The SR30 is powered through the accessory cable connected to a
host device. Depending on which accessory cable you are using,
power comes from either the host device or the external power
supply. For more information about each cable, see “Cable
Accessories” on page 34.
Trigger
Scanner
Status
light

Intermec SR30 Specifications

General

Type	Handheld bar code reader
Scanner type	-
Optical sensor resolution	- pixels
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, Code 93, EAN 2, EAN 5, EAN-13, EAN-8, MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Data Matrix
Input voltage	5 V
Power source type	USB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Product color	Blue, Grey
International Protection (IP) code	IP30

Weight and Dimensions

Width	72.5 mm
Weight	190 g