Intermec SR30 User Manual

Appendix A — Specifications and Accessories
34 SR30 Handheld Scanner User’s Guide
Cable Accessories
USB Cable (P/N 236-164-xxx)
Powered RS-232 (P/N 236-159-xxx. P/N 236-160-001): This cable
supports the Intermec 700, 2435, 5055, 6400, CK3, CK30, CK31,
CK61, CN3, CV60, and CV30 computers.
External powered RS-232 (P/N 236-161-xxx): This cable also
requires one of these universal power supplies: U.S.A. and Canada
(Model AE26) or all other countries (P/N 851-086-xxx).
Keyboard Wedge Cable (P/N 236-162-xxx): This cable also requires
one of these universal power supplies: U.S.A. and Canada (Model
AE26) or all other countries (P/N 851-086-xxx).

Intermec SR30 Specifications

General

Type	Handheld bar code reader
Scanner type	-
Optical sensor resolution	- pixels
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, Code 93, EAN 2, EAN 5, EAN-13, EAN-8, MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Data Matrix
Input voltage	5 V
Power source type	USB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Product color	Blue, Grey
International Protection (IP) code	IP30

Weight and Dimensions

Width	72.5 mm
Weight	190 g