Intermec SR30 User Manual

Appendix A — Specifications and Accessories
28 SR30 Handheld Scanner User’s Guide
Specifications
Use this section to find technical information about the SR30.
Physical Dimensions
Length: 10.79 cm (4.25 in)
Height: 17.27 cm (6.80 in)
Width: 7.37 cm (2.90 in)
Weight: 184.3 g (6.5 oz)
Power and Electrical Specifications
Electrical rating: x 5 V, 0.5 A
Temperature and Environmental Specifications
Operating: 0°C to 50°C (32°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Relative humidity: 5 to 95% non-condensing
Environmental rating: IP30
Bar Code Symbologies
* = Symbologies that are supported by the SR30 Area Imager
only.
• Aztec* • Matrix 2 of 5
• Codabar • MaxiCode*
• Codablock* • MicroPDF 417*
• Code 11 • MSI Code
• Code 39 • PDF417*
• Code 93/Code 93i • Plessey Code
• Code 128/GS1-128 • QR Code*
• DataMatrix* • RSS
• EAN/UPC • Standard 2 of 5
• GS1 Composite* • Telepen
• GS1 DataBar (RSS) • TLC 39
• Interleaved 2 of 5

Intermec SR30 Specifications

General

Type	Handheld bar code reader
Scanner type	-
Optical sensor resolution	- pixels
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, Code 93, EAN 2, EAN 5, EAN-13, EAN-8, MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Data Matrix
Input voltage	5 V
Power source type	USB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Product color	Blue, Grey
International Protection (IP) code	IP30

Weight and Dimensions

Width	72.5 mm
Weight	190 g