Chapter 4 — Configure the Scanner and Base Station as a System
42 SG20B Cordless Scanner + Bluetooth Base Station User’s Guide
UK English Windows - Base station
Japanese Windows - Base station
çg
Brazilian Portuguese Windows - Base station
Czech Republic Windows - Base station
Slovakian Windows - Base station
Hungarian 101-key - Base station
USB Cable Mode
By default the USB cable mode is set to keyboard HID. However you
can also set up your system to use the virtual COM USB cable mode.
The following configuration bar codes only apply to a connection
with the SG20 Bluetooth Base Station when the base station is
connected to your host using a USB cable.
USB Keyboard HID (*)
USB Virtual COM
When you change the USB cable mode, the scanner disconnects from
the base station then automatically reconnects to it.
To Next Page
Loading...
Need help?
General
