Intermec SG20T User Manual

Chapter 1 — Introducing the SG20T Tethered Scanner
SG20T Tethered Scanner User’s Guide 3
SG20T Scan Engine Option: The scan engine option of your SG20T can be
found in the first part of the configuration number. In this illustration, the scan
engine option is SG20T1D for 1D linear imager.
Supported Interfaces
The SG20T supports the following interfaces:
• USB—keyboard HID, virtual COM, IBM Sure POS, and HID POS
• Standard RS-232
• Keyboard wedge/Y-Cable
Powering the SG20T
The SG20T is powered through the accessory cable that connects it to
the host computer. Depending on your connection, power for the
SG20T comes from either the host computer or an external power
supply connected to the interface cable.
Intermec Technologies Corp.
Everett, WA 98203
BDA: XXXXXXXXXXXXXXX
CN: SG20T1D-XXXXXX
12584563214587
Contains TX FCC ID: HN2-BTM311
MEX SCT RCPACBT05-068
IC: ICES-003 CLASS B
IC: 1223A-BTM311
ANATEL: 1192-06-0569
ݭɼ૦ծ
MODEL, , : SG20
5V 1.7A
Made in Singapore
MFD , : YY/MM/DD
Intermec Technologies Corp.
Everett, WA 98203
CN: SG20T1D-XXXXXX
12584563214587
IC: ICES-003 CLASS B
MFD , : YY/MM/DD
MODEL, , : SG20
5V 1.7A
Made in Singapore
ݭɼ૦ծ
SG20T1D-XXXXXX

Intermec SG20T Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D
Optical sensor resolution	- pixels
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Product color	Gray
Built-in display	No
International Protection (IP) code	IP30
Input voltage	5 V
Power consumption	120 mA
Power source type	DC
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	200 mm
Width	61 mm
Height	65 mm
Weight	125 g