Intermec PD41

Chapter 1 — Using the Printer
12 PD41 and PD42 Commercial Printer User’s Guide
Loading Media for Tear-Off Printing
Use this section to load media when you are manually tearing off
labels against the tear bar on the printer. You can use these types of
media for tear-off printing:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
To load media for tear-off printing
1 Open the media cover.
2 Pull out the printhead lever and turn it counterclockwise. Lift up
on the label feed guide.
3 Load a media roll onto the media supply hub. Be sure to push the
roll all the way against the inner wall of the printer and adjust the
edge guide.