Need help?Do you have a question about the Intermec PX4i and is the answer not in the manual?
General| Print Method | Thermal Transfer or Direct Thermal |
|---|---|
| Max Print Width | 4.09 inches (104 mm) |
| Memory | 16 MB Flash, 32 MB SDRAM |
| Resolution | 203 dpi or 300 dpi |
| Connectivity | USB, Ethernet |
| Media Handling | fanfold |
| Media Types | Labels, Tags |
| Operating Temperature | +5°C to +40°C (+41°F to +104°F) |
| Weight | 12.3 kg |
| Dimensions | 482 mm x 270 mm x 238 mm (19.0 in x 10.6 in x 9.4 in) |
Overview of PX4i/PX6i printers, their features, and what's new in this version.
Identifies the key components of the printer via front and back views.
Explains how to choose the printer's command language upon initial startup.
Details the printer's control panel buttons, LEDs, and LCD screen.
Details the sounds the printer makes in response to various actions.
Provides instructions on how to load different types of media into the printer.
Instructions for loading thermal transfer ribbon into the printer.
Steps to print test labels for verification and information retrieval.
Guidance on using software or commands to create and print labels.
Guidelines for achieving best print quality when printing on RFID media.
Details connecting the printer via Serial, USB, or IEEE 1284 ports.
Guides for establishing network connectivity via Ethernet or Wireless.
How to connect external devices like keyboards and scanners to the printer.
Explains various methods to change printer configuration settings.
How to configure serial communications, interface, and keyboard layout.
How to view and change media settings like XSTART position and contrast.
How to configure settings for printing on RFID media.
Adjusting media feed direction and print speed.
How to change test/default settings and print test labels.
How to view and change printer alert settings and notification methods.
How to set printer name, change passwords, and set restrictions.
How to view and change e-mail (SMTP) server settings.
How to view and change SNMP settings for network monitoring.
How to view and change TCP/IP network settings for IPv4 and IPv6.
How to choose between Ethernet and wireless 802.11 network types.
How to view and change 802.11 wireless settings.
How to view and change 802.1x security settings for wireless interface.
Using PrintSet software for printer configuration and setup.
Changing configuration parameters by sending commands via terminal program.
Using SmartSystems Foundation for managing printers and pushing configurations.
Using Wavelink Avalanche for remote configuration of wireless printers.
How to download and install the latest printer firmware.
How to download additional fonts and graphics to the printer's memory.
General guidance on resolving printer operation and communication problems.
Information on how to contact Intermec Product Support for assistance.
Tables to help troubleshoot common error messages displayed on the printer screen.
Instructions on how to reset the printer to its factory default settings.
How to adjust printer settings for optimal printing performance.
Information on performing regular maintenance to keep the printer working properly.
Instructions on how to clean the printer's exterior, media guides, and printhead.
Procedures for replacing the printer's printhead due to wear or damage.
Dimensions and weight of the PX4i and PX6i printers.
Printer voltage and current requirements.
Operating and storage temperature and humidity ranges.
Supported communication interfaces like Serial, USB, Ethernet, and 802.11b/g.
Details about the printer's RAM, Flash, and optional memory.
Specifications for print mode, speed, resolution, and print dimensions.
Details about the printer's Serial, USB, Ethernet, and Parallel interfaces.
Specifications for media core, roll, width, length, and gap.
Information on available accessories like cutters, retainers, and sensors.
Default values for printer configuration commands across various parameters.
Default settings for Fingerprint command parameters.
Default settings for IPL command parameters.
Overview of the Fingerprint setup menus and their options.
Overview of the IPL setup menus and their options.
Details about the printer's file system structure and directories.
How to modify the printer's web page appearance using HTML files.
Information on using web style guide files to customize printer network pages.
Details the structure and mandatory/optional variables for web style guide files.
To Next Page
