Intermec PX4i

Chapter 3 — Configuring the Printer
PX4i and PX6i High Performance Printer User’s Manual 105
To upgrade using a serial or USB connection
• Use Fingerprint or IPL commands to send the upgrade file to your
printer.
For help, see the Intermec Fingerprint Command Reference Manual
or the IPL Command Reference Manual.
To upgrade using an Ethernet or 802.11 network connection
1 Start your web browser application.
2 In the address field, enter the IP address of your printer.
3 Press Enter. Your printer’s home page appears.
4 From the menu at the top of the page, click Maintenance. The
firmware upgrade screen appears.
5 Click Browse and browse to the location of the firmware upgrade
file.
6 Double-click the file, and then click Upgrade.
Downloading Fonts and Graphics
The printer supports 15 scalable Unicode TrueType and TrueDoc
fonts as standard. The Unicode standard allows the use of special
characters for various languages including non-Latin fonts, such as
Arabic, Cyrillic, Chinese (including enhanced Simplified Chinese
GB18030), Japanese, Korean, and Hebrew.
You can download additional fonts to the printer’s Flash memory
using:
• PrintSet. You can download PrintSet from the downloads page for
the printer on the Intermec web site at www.intermec.com.
• Fingerprint or IPL commands. For help, see the Intermec
Fingerprint Command Reference Manual or the IPL Command
Reference Manual.
• a CompactFlash card or external 2GB USB mass storage device.