Intermec PX4i

Chapter 1 — Using the Printer
PX4i and PX6i High Performance Printer User’s Manual 5
Once your printer is running a particular printer language, you can
change the printer language from the Setup menu. The way that you
access the command language menu depends on which language you
are currently running.
Understanding the Control Panel
The control panel provides buttons, LEDs, and a liquid crystal display
(LCD) for you to interact with the printer.
Control Panel: Use this illustration to familiarize yourself with the buttons and
lights on the printer.
Changing the Printer Language From the Setup Menu
Language How to Access the Command Language Menu
IPL
• Go to SETUP > TEST/SERVICE > CMD
LANGUAGE.
Fingerprint or
Direct Protocol
• Go to SETUP > PRINT DEFS > CMD LANGUAGE.
ZSim or DSim
1 Press T.
2 Enter the Fingerprint password: 8311.
3 Press E.
4 Go to SETUP > PRINT DEFS > CMD LANGUAGE.
Pause Setup
Feed
F3
F5
F2
F4
F1
Shift
123
456
789
0
Clear
Enter
./-
Status