Intermec PX4i

Chapter 4 — Troubleshooting and Maintaining the Printer
126 PX4i and PX6i High Performance Printer User’s Manual
2 Modify one or more LTS settings.
Maintaining the Printer
To keep your printer working properly, you should perform regular
maintenance.
Cleaning the Printer
To properly maintain your printer, you should regularly clean it. You
can clean the:
• exterior of the printer.
• media guides.
• printhead.
Setting How to Modify
LTS Adjust
1 Press E. The printer feeds a label.
2 Remove the label and press E again. The printer
displays the sensitivity value that is automatically
selected by the firmware and the range in which the
LTS will work.
3 Press E again to proceed to the LTS Test menu.
LTS Test
1 Press E. The printer feeds a label.
2 Remove the label. The printer automatically feeds
another label.
3 Repeat Steps 1 and 2 until you are sure the LTS is
working properly.
4 Press E to stop the test and exit.
LTS Value
1 Press E.
2 Enter a new LTS value within the range indicated in
the LTS Adjust menu (0 to 10).
To avoid possible personal injury or damage to the printer, never
insert any pointed or sharp objects into the printer.