Intermec PX4i

Chapter 3 — Configuring the Printer
PX4i and PX6i High Performance Printer User’s Manual 91
Configuring TCP/IP Settings
Use the TCP/IP settings page to view and change TCP/IP network
settings.
To configure TCP/IP settings
1 Click Network Admin > TCP/IP.
2 View or update your settings.
3 Click Submit TCP/IP settings.
Use the following table to understand the TCP/IP settings.
Understanding the TCP/IP Settings
Setting Description
IPV4 Settings Configuration method: The method by which an IP
address is assigned to the printer. You can choose
between DHCP, BOOTP, DHCP+BOOTP, or
MANUAL.
Address: The current IP address of the printer.
Netmask: Manually assigned netmask for the printer.
Default Router: The IP address of the default router.