Intermec PX4i

Appendix A — Specifications
152 PX4i and PX6i High Performance Printer User’s Manual
Tickets With Black Mark (Mark Stock)
LSS Detection Position (c)
This position is variable. For help, see “Adjusting the Label Stop
Sensor” on page 121.
Media Width (a)
Printer Measurement Value
PX4i Maximum 120 mm (4.72 in)
Minimum 25.0 mm (1.00 in)
PX6i Maximum 170 mm (6.69 in)
Minimum 76.0 mm (3.00 in)
Copy Length (b)
Measurement Value
Minimum 20.0 mm (0.8 in)
Maximum 6,143 mm (241 in) Depends on SDRAM size.
Black Mark Width (d)
Measurement Value
Maximum Full media width
Recommended 10.0 mm (0.39 in)
Minimum 5.0 mm (0.20 in)
Black Mark Length (e)
Measurement Value
Maximum 25.0 mm (0.98 in)
Recommended 3.2 mm (0.13 in)
Minimum 1.27 mm (0.05 in)