Need help?Do you have a question about the Intermec PW50 and is the answer not in the manual?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Print Speed | 4 ips (inches per second) |
| Maximum Print Length | 39 inches (991 mm) |
| Connectivity | USB, Bluetooth |
| Media Type | Labels |
| Battery | Lithium-ion |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Memory | 128 MB Flash |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
Provides safety information, technical support, and sources for additional product information.
Provides warnings and cautions for handling and operating the Intermec equipment safely.
Details on obtaining warranty, web support, feedback, and telephone support.
Information on the manual's intended audience and references to other relevant documentation.
Covers initial configuration, host communication methods, and Bluetooth setup.
Details serial port setup and downloading fonts and graphics.
Procedures for upgrading firmware and understanding printer operational modes.
Explains Test mode and Extended Test mode for diagnostics and settings verification.
Details options in Extended Test mode and the printer's Upgrade mode.
Guidance on resolving printer issues and contacting product support.
Explains error messages and provides solutions for common printer problems.
Troubleshooting for printhead overheating, Bluetooth connectivity, and print quality.
Covers battery issues, cold booting, and troubleshooting print quality.
Proper procedures for cleaning the printer's components at recommended intervals.
Covers physical dimensions, power requirements, and temperature/humidity ranges.
Lists memory capacity and describes the direct thermal printhead technology.
Details media dimensions, lengths, requirements, and supported types with settings.
Lists optional accessories, cables, straps, and cleaning items.
To Next Page
