Chapter 2 — Configuring the PW50
24 PW50 Workboard Printer User Guide
Understanding Test Mode
Use Test mode to verify printer settings, print testprints, restore
factory default settings, or enter Dump mode for troubleshooting
purposes. Two test modes are available: Test mode and Extended Test
mode.
Using Test Mode
Test mode consists of a sequence of events that requires very little
interaction. Extended Test mode requires more interaction and lets
you choose which actions you want the printer to perform.
To enter Test mode
1 Make sure the PW50 is in Standby mode and is loaded with media.
2 Press and hold the Standby and Feed buttons until the PW50
beeps.
To Next Page
Loading...
