Intermec PW50

Chapter 1 — Using the PW50 Workboard Printer
PW50 Workboard Printer User Guide 5
Understanding the Control Panel
The PW50 control panel contains two buttons and four LED
indicators. Use the two buttons to perform functions on the PW50
printer.
PW50 Control Panel: Use this illustration to familiarize yourself with the
buttons and LEDs on the PW50.
Note: The Intermec Ready-to-Work™ indicator and the Status LED
also indicate the status of the printer modes. For more information,
see “Understanding the Printer Modes” on page 23.
Understanding How to Use the PW50 Buttons
Button Name Functions
Standby
(Power)
Press to put the printer in Standby mode. In Standby
mode, power to the radio and all communications
ports (USB, COM1, and Bluetooth) are turned off.
Press to turn the printer back on and put the printer in
Ready mode.
Press and hold for more than 2 seconds to enable or
disable Bluetooth communications.
Standby button
Communications
Status
Intermec
Ready-to-Work
indicator
Battery
Feed button