Intermec PW50

Chapter 2 — Configuring the PW50
PW50 Workboard Printer User Guide 21
To connect the PW50 to a PC
1 Connect the 8-pin circular DIN connector on the serial cable
(P/N 075497-001) to the serial port on the PW50.
2 Connect the other end of the serial cable to a serial port on the
back of your PC.
Downloading Fonts and Graphics
You can download fonts and graphics:
• using PrintSet. You can download PrintSet from the downloads
page for the PW50 printer on the Intermec website at
www.intermec.com. Follow the procedures in the PrintSet online
help to download fonts and graphics.
• using ESC/P commands to send files to the printer. For help with
commands and information, see the ESC/P Programmer’s
Reference Manual.
• from your mobile computer using files available from the
Intermec website. You download a self-extracting cabinet file (.cab)
to copy onto your mobile computer. When you double-click the
.cab file, the mobile computer sends the files down to the PW50.
Serial
cable
Serial
port