Intermec PX4i

Appendix A — Specifications
PX4i and PX6i High Performance Printer User’s Manual 139
Printing Speed and Resolution
Specification Description
Print Mode Direct
Thermal Transfer
Print Speed (variable) 100 to 300 mm/sec (4 to 12 in/sec)
Printhead Resolution 8 dots/mm (203.2 dpi)
11.81 dots/mm (300 dpi)
16 dots/mm (406 dpi) (PX4i only)
Print Width (maximum)
PX4i Direct Transfer
PX4i Thermal Transfer
PX6i
112 mm (4.41 in)
110 mm (4.33 in)
167.4 mm (6.59 in)
Print Length (maximum)
Fingerprint
IPL
32767 dots
= 409.5 cm (161.25 in) at 203.2 dpi
= 277.5 cm (109.23 in) at 300 dpi
= 409.5 cm (161.25 in) at 203 dpi
Note: The maximum print length is also
restricted by the amount of free SDRAM
memory.
Media Width
PX4i
PX6i
25 to 120 mm (1 to 4.72 in)
76.2 to 170 mm (3 to 6.69 in)
Media Roll Diameter (maximum) 213 mm (8.38 in) Tear-Off
205 mm (8.07 in Peel-Off
Media Roll Core Diameter 38 to 40 mm (1.5 in)
76 mm (3 in) with adapter fitted
Ribbon Width
PX4i
PX6i
55 to 110 mm (2.17 to 4.33 in)
76.2 to 168 mm (3 to 6.61 in)
Ribbon Roll Outer Diameter
(maximum)
80 mm (3.15 in)
± 450 m (1476 ft) of ribbon
Ribbon Roll Core Inner Diameter 25 mm (1 in)
Print Directions 4