11
To dial numbers from memory
• either lift the Handset or press the Handsfree/Headset button
• once dial tone is present press the required memory button, the stored
number will then be dialled automatically.
Redial / Pause Function
Redial
If the number dialled is busy,
• hang-up and obtain a new line by either lifting the Handset or pressing the
Handsfree/Headset button.
• press the button labelled Redial/Pause and the last number (up to 32
digits) that you dialled will automatically be redialled.
Pause
The Pause command may be needed if the phone is connected to certain types
of PABX or to any network where a pause is required.
• Lift handset
• Dial any digits required before the pause
• Press Pause button
• Dial remaining digits
To Next Page
Loading...
