Need help?Do you have a question about the Interroll 113S and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Efficiency Class | IE1 |
| Type | Asynchronous motor |
| Voltage | 400 V |
| Frequency | 50 Hz |
Describes design principles, intended applications, and operating limits.
Outlines required qualifications for operators and service personnel.
Details risks like electric shock, oil exposure, rotating parts, and hot surfaces.
Explains the function and use of encoders for position and speed control.
Technical details, connections, and data for various encoder and resolver types.
Covers general installation, positioning, mounting bracket use, and clearances.
Details belt assembly, adjustment, tensioning, and elongation calculations.
Instructions for wiring the drum motor via cable or terminal box.
Covers single-phase motors, protection, frequency inverters, backstops, and brakes.
Pre-operation checks to ensure correct installation and readiness.
Warnings and checks for safe operation, including rotating parts and accident procedures.
Covers issues like motor not starting, overheating, noise, vibration, and winding failures.
Addresses problems like belt slippage, incorrect adjustment, and material deposits.
Troubleshooting for oil leaks, discoloration, and shaft seal problems.
Diagnosing issues related to gearbox and bearing wear or failure.
Troubleshooting common problems with electromagnetic brakes and their rectifiers.
Addresses faults related to encoder connections, backfeed systems, and PC/drive errors.
To Next Page
