Need help?Do you have a question about the Interroll i Series and is the answer not in the manual?
General| Motor Technology | Brushless DC Motor |
|---|---|
| Protection Class | IP54 |
| Roller diameter | 50 mm |
| Supply Voltage | 24 V DC |
| Communication Interface | CANopen |
| Load capacity per roller | 150 N |
| Speed | 0.1 - 1.5 m/s |
Specifies the approved applications and environments for the drum motor.
Lists prohibited uses and associated potential hazards.
Identifies potential hazards during motor operation and maintenance.
Warns about the risk of unintentional motor startup during maintenance.
Presents key specifications, performance parameters, and operational ratings.
Describes the integrated and optional thermal protection mechanisms for the motor.
Explains considerations for operating 50-Hz motors on 60-Hz electrical systems.
Details the information provided on the i-series motor's identification plate.
Lists detailed electrical specifications for various i-series motor models.
Provides dimensional drawings and specifications for i-series drum motors.
Shows standard wiring configurations and cable connections for i-series motors.
Details the information provided on the S-series motor's identification plate.
Lists detailed electrical specifications for various S-series motor models.
Provides dimensional drawings and specifications for S-series drum motors.
Shows standard wiring configurations and cable connections for S-series motors.
Details the information provided on the S/A-series motor's identification plate.
Lists detailed electrical specifications for various S/A-series motor models.
Shows standard wiring configurations and cable connections for S/A-series motors.
Illustrates the specific wiring within the terminal box for S/A-series motors.
Details the information provided on the D-series motor's identification plate.
Lists detailed electrical specifications for various D-series motor models.
Shows standard wiring configurations and cable connections for D-series motors.
Discusses motor performance characteristics when used with frequency inverters.
Specific instructions on using mounting brackets for secure motor installation.
Details the correct procedures for wiring the drum motor to the power supply.
Guidance on using frequency inverters with drum motors for speed control.
Outlines the essential steps to perform before the first motor operation.
Addresses issues related to motor starting, stopping, or intermittent operation.
Explains causes and solutions for motor overheating during normal use.
Troubleshoots motor issues potentially caused by a single-phase winding failure.
Troubleshoots motor issues potentially caused by a two-phase winding failure.
Troubleshoots motor issues potentially caused by a three-phase winding failure.
Addresses common causes and solutions for belt slippage on the drum motor.
Addresses complete or partial failure of the brake and rectifier systems.
To Next Page
