Interroll Drum motor series i, S, S/A, D
74
Version 4.1 (06/2015) en-US
Translation of original instruction manual
Transport and storage
Transport
CAUTION
Improper transport poses an injury hazard.
4
Transport-related tasks should only be carried out by qualified and authorized persons.
4 For drum motors with a diameter of 136 mm or more, use a crane or hoisting equipment
during the transport. The rated load of the crane or hoisting equipment must be greater
than than the weight of the drum motor. Crane rope/cable and hoisting equipment must
be securely fastened to the shafts of the drum motor during lifting.
4
Do not stack pallets.
4 Before the transport, ensure that the drum motor is sufficiently secured.
NOTICE
Risk of damages to the drum motor due to improper transport
4
Avoid serious impacts during transport.
4 Do not lift the drum motor at the cable or terminal box.
4 Do not transfer the drum motors between warm and cold environments. This may lead to the
formation of condensation.
4
For the transport in shipping containers, ensure that the temperature in the container is not
permanently above 70 °C (158 °F).
4 Ensure that motors of the S-series that are intended for vertical mounting are transported in
horizontal position.
4
Check each drum motor visually for damage after transport.
4 In the event of damage, take photos of the damaged parts.
4 In case of a transport damage, immediately notify the carrier and Interroll to avoid losing
any claims for compensation.
To Next Page
Loading...
Need help?
General
