Interroll Drum motor series i, S, S/A, D
i-series product information
28
Version 4.1 (06/2015) en-US
Translation of original instruction manual
Dimensions of i-series drum motor
Some dimensions are listed as "SL+". SL is the abbreviation for "shell length" (tube length).
This information is located on the type plate of the drum motor (See "Type plate of i-series drum
motor", page 17).
All the length-dependent dimensions in the catalog and in this manual comply with the
requirements of DIN/ISO 2768 (medium quality).
The recommended distance between the mounting brackets (EL) under consideration of the
maximum thermal expansion and internal tolerances is EL + 2 mm.
ØA
ØE
FW
EL
C
C
D
F
HH
P
P
SL
1/3 1/3 1/3
Dimensions of i-series drum motor
Type A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
H
mm
P
mm
FW
mm
EL
mm
AGL
mm
80i cambered 81.5 80.5 12.5 17 43 13.5 6 2 SL+7 SL+12 SL+37
80i cylindrical 81 81 12.5 17 43 13.5 6 2 SL+7 SL+12 SL+37
80i cylindrical + key 81.7 81.7 12.5 17 43 13.5 6 2 SL+7 SL+12 SL+37
113i cambered 113.5 112 25 25 83 20 10 1.5 SL+10.6 SL+20 SL+70
113i cylindrical 112 112 25 25 83 20 10 1.5 SL+10.6 SL+20 SL+70
113i cylindrical + key 113 113 25 25 83 20 10 1.5 SL+10.6 SL+20 SL+70
138i cambered 138 136 25 30 100 20 15 1.5 SL+13 SL+30 SL+80
138i cylindrical 136 136 25 30 100 20 15 1.5 SL+13 SL+30 SL+80
138i cylindrical + key 137 137 25 30 100 20 15 1.5 SL+13 SL+30 SL+80
165i cambered 164 162
45 40 130 30 20 1.5 SL+17 SL+40 SL+130
165i cylindrical 162 162 45 40 130 30 20 1.5 SL+17 SL+40 SL+130
165i cylindrical + key 162 162 45 40 130 30 20 1.5 SL+17 SL+40 SL+130
217i cambered 217.5 215.5 45 40 130 30 20 1.5 SL+17 SL+40 SL+130
217i cylindrical 215.5 215.5 45 40 130 30 20 1.5 SL+17 SL+40 SL+130
To Next Page
Loading...
Need help?
General
