Interroll Drum motor series i, S, S/A, D
S/A-series product information
Version 4.1 (06/2015) en-US
Translation of original instruction manual
49
Dimensions of S/A-series drum motor
Some dimensions are listed as "SL+". SL is the abbreviation for "shell length" (tube length).
This dimension is indicated on the type plate of the drum motor (See "Type plate of S/A-series
drum motor", page 47).
All the length-dependent dimensions in the catalog and in this manual comply with the
requirements of DIN/ISO 2768 (medium quality).
The recommended distance between the mounting brackets (EL) under consideration of the
maximum thermal expansion and internal tolerances is EL + 2 mm.
F
EL
Ø45
ØA
SL
FW
D
1/3 1/3 1/3
H
C
C
11
H
11
Dimensions of 113S/A
Type A
mm
B
mm
C
mm
D
mm
F
mm
H
mm
EL
mm
AGL
mm
113 S/A solid axle version,
cambered
113.3 112.4 25 25 20 14 SL+28 SL+78
113 S/A solid axle version,
cylindrical
113 113 25 25 20 14 SL+28 SL+78
113 S/A shaft-end cap
version, cambered
113.3 112.4 20 35 21 14 SL+28 SL+68
113 S/A shaft-end cap
version, cylindrical
113 113 20 35 21 14 SL+28 SL+68
To Next Page
Loading...
Need help?
General
