64
Para Ayuda Técnica o Solicitudes de Ventas:
Oficinas locales de Interspace Industries:
+34 932 965 084
Teléfono de Soporte Técnico:
+34 932 965 084
Página Web:
www.grandslam.es/interspace_industries/
Per il Supporto Tecnico o Richieste Commerciali:
AGMULTIVISION SRL
+39 02 87166000
Per aprire un ticket di assistenza:
https://www.agmultivision.it/supporto.html
Sito Web:
www.agmultivision.it
Para Ajuda Técnica ou Pedido de Vendas:
Serviços locais de Interspace Industries:
+34 932 965 084
Telefono de Suporte Técnico:
+34 932 965 084
Página Web:
www.grandslam.es/interspace_industries/
Assistance Technique ou Enquêtes de Ventes:
Interspace Industries Head Office:
+34 932 965 084
Emergency Technical Support Hot Line:
+34 932 965 084
Website:
www.interspaceind.com
5
First time connection.
The MicroCue3 uses the inbuilt driver with the computer's operating system for USB devices.
As you plug each port of the MC3 to a computer's USB connection, the computer will
configure itself, it is important to let it do this without unplugging it or really using it. Wait for it
to say (in the case of PC) it has configured the device and is ready to use. - If the port has
been installed incorrectly it could have problems for subsequent installs and you will have to
uninstall the device. - please consult your IT manager for this function. Usually there are no
issues and as soon as it is installed you can use it fully.
Adding a Handset.
When you need to add a new handset. Push the menu jog button and it shows learn at the
top. Push again to select, Learn Handsets is displayed, push again. Push any button on that
handset and then push the Jog button to confirm it is that one. - the handset is stored.
Erasing
There are a couple of options on MC3 to remove handsets.
1st, select the menu jog button and select Erase and then Erase Handsets and then to erase
all handsets, select yes. This will erase all handsets, this is a good place to be and will ensure
you have a good starting point for handsets.
When on the Network, it will erase all the handsets on that unit (both local and from the
network) and also send a message to erase those handsets from all other units that have
copied from the initial unit. All other units will keep their locally stored handsets.
2nd, Select Erase All this will erase Handsets and Keyboard functions - this is factory reset
and will ensure a proper starting point for everything on that unit.
3rd, Select Erase Handset xxx - this will allow you to select which Handset you need to erase
if you are mid show without upsetting all the other handsets and features.
4th, Network erase. A global erase for everything on the network. WARNING THIS WILL
ERASE EVERYTHING BACK TO FACTORY SETTINGS. This has an additional confirmation
to ensure you really want to.
EN
To Next Page
Loading...