Intertek 42193 - Final Assembly & Operation; Step 16: Pull Chain Extensions; Operating: Reverse Switch; Operating: Fan Speed Control

10
Light Pull
Chain
Light Pull
Chain
Reverse
Switch
Fan Pull
Chain
Fan Pull
Chain
OPERATING INSTRUCTIONS
1. Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your thermostat
setting in winter without feeling a dierence in your
comfort.
In warmer weather, push the reverse switch left which
will result in downward airow creating a wind chill
eect.
In cooler weather, push the reverse switch right which
will result in upward airow that can help move stagnant,
hot air o the ceiling area.
Important: Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate.
2. The fan pull chain has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three is LOW
and four turns the fan OFF. The light pull chain turns the
light ON and OFF.
1
2
ASSEMBLY INSTRUCTIONS
16
16. Attach pull chain extensions to the pull chains.
Note: The pull chain in the center of the light kit controls
the light.
Installation is complete.
Turn ON the electrical power at the main fuse or circuit
breaker.